Download Argus Software For Mac

Posted on by

Overview - Fan Control, S.M.A.R.T. monitoring and more

ARGUS on Demand provides two access options via the deployment of ARGUS Enterprise 11.7.2: ARGUS Remote Client connection; Citrix connection; An ARGUS Remote Client allows Windows-based users access to ARGUS Enterprise without logging into ARGUS On Demand or downloading Citrix. This connection allows access to additional ARGUS Enterprise functionality that cannot be delivered via Citrix. Before installing Argus make sure your Realwear is up to date, charged and connected to the internet. Via Realwear Explorer. Checklist: Realwear Device; Mini USB cable; A Windows or Mac PC; A wired or wireless connection for your PC; Realwear explorer is a software for Windows & Mac which lets you manage your individual Realwear device.

Fan Control

One of the many features of Argus Monitor is the fan control of system and CPU fans connected to the mainboard of your PC. Argus Monitor is a possible alternative to SpeedFan. Prerequisites for using the fan speed control of Argus Monitor is a supported SuperIO monitoring chip.

The program can control most commercially available monitoring chips from Nuvoton, ITE, Winbond, Fintek and SMSC, which are installed on the most widely used motherboards from Asus, Asrock, Gigabyte and MSI. In addition, fans on Lenovo Thinkpad and Dell notebooks can be controled.

The speed of the fans can either be set manually to a fixed value or controlled with a characteristic curve depending on all available temperature sources.

All available temparature sources can be used as input for the fan controller, namely CPU temperature, GPU temperature, hard drive/SSD temperatures or temperature readings of all temperature sensors on the mainboard. For CPU and GPU temperatures also the average temperature over a (configurable) time span is available. As an advanced feature a combination of up to four of the above mentioned temperature values can be selected (more precisely the maximum control value of up to 4 independent controllers).

Argus Monitor - probably one of the best mainboard fan control tools out there.

Argus Monitor - control options for system fan control

Similar to the fan control of system and CPU fans, a fan control of the graphics card fans is also available.

Argus Monitor - advanced GPU fan control

SMART monitoring of hard disk drives and SSDs

Since the first release of Argus Monitor in 2009 the program offers functionality to monitor the health status of HDDs and since there avaiability in the mass market also of those of SSDs.


Many if not all computer users experience data loss due to hard drive failure at one point in time. If you're lucky, you will notice error messages while accessing your files and will be able to save some of your data to another drive before the failing one stops working completely. Iphone unlocking software free download for mac.

Unfortunately, as soon as you will be unable to access SOME of your files due to mechanical failure of your hard drive you have only very little time to react and save the most precious data you have not backed up to another physical medium before.

Fortunately, almost all modern hard drives support a technology called S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology). Studies have shown, that up to 70 percent of all hard disk failures can be predicted in time so that the user has time to save all imporant data before the disc fails completely. The most extensive of these studies was done by Google by monitoring 100.000 hard disk drives of all major manufacturers over a period of nine months.

Because the Windows operating systems (up to and including Windows® 7) do not inform the user of the S.M.A.R.T. status of the systems disks, additional software is required if you want to profit from the failure predicting capabilities of your drives.

Argus Monitor runs as a background task and constantly monitors the health status of your hard disks. You will be informed in case one of the critical S.M.A.R.T. values changes. If one of the attributes reaches a vendor specified threshold, you will also get a warning that the hard drive is likely to fail within the next 24 hours of operation. Argus Monitor also stores the S.M.A.R.T. status of every drive (even the ones attached only from time to time - e.g. via S-ATA) and will therefore be able to warn you of decreased drive health even if the hard drive was attached to another PC when the value decreased.

ARGUS On Demand

Navigation: My Applications

View a list of your current products and launch them from this page.

Once your service is provisioned then your chosen client download link displays.

Click the here link to check the system requirements for ARGUS On Demand.

Launch Your ARGUS Application(s)

IMPORTANT: To launch your product you must have either ARGUS Remote Client (Windows) or Citrix Receiver software (Windows or Mac) installed on your computer.

ARGUS Software Remote Client: Select ARGUS Software in your Windows Start Menu.

Citrix Receiver: Navigate to My Applications and click . Note: If you see a popup asking if you want to open or save the application, click Open.

Note: Team subscriptions in AE 11.6 will also see a button for XL4ADW download. (XL4ADW is not available for Mac.)

Download the ARGUS Remote Client

Use this procedure to download and install the ARGUS Remote Client for MS Windows 7 and higher.

Before you begin: Go to your My Applications page for a link.

Download Argus Software For Mac

1.Click .
Result: The download begins. Wait for the file to download.
Note: The correct name of the download file is XL4ADW_setup(20).exe. This filename may include a number in parenthesis if you have downloaded it more than once.

2.Locate the downloaded file and double click to launch it.

3.In the resulting popup click Run to launch the Setup Wizard.

4.Click Next to start the Setup Wizard.

5.Click the checkbox to accept the terms and conditions.

6.Click Install.

7.Review the information on the resulting popup.
Result: The ARGUS Remote Client installs. The ARGUS Softwareremote clientdisplaysin your Windows Start Menu.

ARGUS Enterprise Server Connection

The first time you launch the ARGUS Remote Client you will see a blank ARGUS Enterprise Server Connection popup.

1.Enter your User ID (this is the email address used for your ARGUS On Demand login).

2.Type your Password.
Location displays Detect Automatically.

Download Argus Software For Mac Os

3.Click OK.

Option: The Click here link takes you to a password reset screen.

Result: ARGUS Enterprise launches.

Note: The next time you launch ARGUS Remote Client the User ID and Location should be saved and you will only need to enter your password.

Argus Enterprise Software Download

Download Citrix Receiver

Use this procedure to download and install Citrix Receiver for MS Windows 7 and higher or Apple Macintosh.

Before you begin: Either go to your My Applications page for a link or navigate to

1.Select your version of Citrix Receiver 4.3 or higher for Windows or 11.9.15 or higher for Mac.

2.In the resulting popup either:

Click Run to immediately run the application. Go to the next step.

Click Save. Go to the next step when you are ready to run the application.

3.At the Welcome to Citrix Receiver popup click Start.

4.Click the checkbox to accept the license agreement and then click Next.
Option: If you wish to have your device remember your credentials for other Citrix applications then click the Enable Single Sign-on checkbox.

5.Click Next.
Option: Click a radio button to agree to or opt out of the Citrix Customer Experience Improvement Program.

Argus Software Cost

6.Click Install.

7.At the Installation Complete popup click Finish.

8.Go to your ARGUS On Demand My Applications page to launch your ARGUS product in Citrix Receiver.

Argus Download

ARGUS On Demand 7.0 Help v. 1.1

© 2018 ARGUS Software, Inc.

Argus App Download